Heating
Electric heaters in Tampa Bay
Electric heat strips, baseboard and wall heaters, and the backup heat in your heat pump, installed, repaired and tested so you stay warm on the coldest Tampa mornings.
The short answer
Electric heaters are the most common backup heat in Tampa Bay homes, from the heat strips inside a heat pump air handler to standalone baseboard and wall units. FL HVAC Team installs, repairs and tunes every type, whether your heat pump stops keeping up on a cold morning, a heat strip will not energize, or a wall heater in an older home has quit. A licensed technician tests the elements, sequencers and wiring, shows you a flat-rate price before any work, and makes sure the heat comes on when the temperature drops.
Most Gulf Coast homes rarely need heat, so when a cold front pushes Tampa into the 30s the backup electric heat suddenly matters. In a heat pump system, electric resistance strips kick in automatically when the outdoor unit cannot pull enough warmth from cold air, and they are also what runs in emergency heat mode. Standalone electric heaters, baseboard units and wall heaters are still common in additions, garages and older homes. Because these elements draw a lot of power and sit idle most of the year, a weak element or a failed sequencer often hides until the one night you need it, which is exactly when we get the calls.
What we handle
Common heating jobs
Heat pump heat strips
The electric resistance strips that kick in for backup and emergency heat. We test the elements, sequencers and relays so they energize when the outdoor unit cannot keep up on a cold morning.
Electric furnaces and air handlers
All-electric systems that heat the whole home through your ducts. We service the heating elements, blower and controls and correct nuisance tripping.
Baseboard and wall heaters
Standalone electric units common in additions, bathrooms and older Tampa homes. We repair or replace failed elements, thermostats and burned wiring.
Emergency heat mode issues
When a system is stuck on auxiliary heat or the emergency heat setting will not respond, we trace the thermostat, wiring and controls back to the real fault.
How it works
Our process
Step 01
Call or book
Tell us whether it is a heat pump backup, an electric furnace or a wall heater, and we give you a real arrival window.
Step 02
Free diagnosis and estimate
The technician tests the elements, sequencers, thermostat and wiring, shows you what failed, and gives you a flat-rate repair price at no charge before any work begins.
Step 03
Repair and verify
You approve the price and we complete most repairs on the spot, then confirm the heat is coming on and the amp draw is safe before we leave.
Every visit
What’s included
Clear, upfront work with no surprises. Call (813) 603-6398 and we will get started.
- Full inspection of elements, sequencers and relays
- Thermostat and emergency heat mode testing
- Electrical and amp-draw checks for safe operation
- Flat-rate price approved before work starts
- Common parts stocked on every truck
- A heating check before we leave
Upfront about pricing
What affects the cost
Every job is quoted flat-rate before work starts. Here is what moves the number.
The failed component
A sequencer or a single heating element is a quick, lower-cost fix. A full set of strips, a control board or burned wiring is a larger repair, and we tell you honestly which you are facing.
Type of heater
A heat strip inside an existing air handler, a whole-home electric furnace, and a standalone wall or baseboard unit each call for different parts and labor, which we explain up front.
Electrical condition
Older circuits, undersized wiring or a worn breaker can be the real cause of nuisance tripping. If the wiring needs attention for safe operation, we flag it before quoting.
Rated 5.0 from 145 reviews
Tampa Bay homeowners trust us for punctual, flat-rate service. Read what your neighbors say, or add your own.
Read our Google reviewsGood questions
Before you book
When do the electric heat strips turn on in my heat pump?
They energize automatically when the outdoor unit cannot pull enough heat from cold air, usually on Tampa mornings in the 30s and 40s, or when you set the thermostat to emergency heat. They are backup heat, not the main source, so running on strips for long points to a problem worth checking.
Why is my power bill so high when the backup heat runs?
Electric resistance heat uses a lot more energy than the heat pump itself. A few cold days of strip heat can spike a bill. If the strips are running when it is not very cold, the heat pump may be low on refrigerant or faulty, which we can diagnose.
Is electric heat safe in my home?
Yes, when it is wired and sized correctly and the elements are in good shape. The risks come from worn wiring, failed sequencers that leave strips energized, or overloaded circuits. We test amp draw and controls so your system runs safely.
Should I switch to a heat pump instead of electric strips?
For most Tampa homes a heat pump is far cheaper to run because it moves heat instead of making it with resistance. Electric strips are ideal as backup for the handful of truly cold nights. We can walk you through both so the numbers make sense.
My emergency heat setting will not work. What is wrong?
It is usually the thermostat wiring, a failed sequencer or relay, or a burned-out element. Running on emergency heat means the system bypasses the heat pump and uses strips only, so a fault there leaves you cold. We trace it back to the real cause.
Can you fix an old baseboard or wall heater?
Yes. We repair and replace elements, thermostats and wiring on standalone baseboard and wall heaters common in older Tampa homes and additions. If a unit is unsafe or past its life, we show you replacement options with no pressure.
Why does my electric furnace trip the breaker?
A heating element shorting out, a loose or corroded connection, or an undersized circuit can all trip the breaker. Repeatedly resetting it risks damage, so turn the system off and let us diagnose it safely.
Do you service electric heat the same day?
We keep same-day slots open most days and answer the phone 24/7, which matters when a cold front arrives and the backup heat will not come on. Call early for the widest choice of windows.
Why FL HVAC Team
Neighbors who show up
Safety first
Electric heat draws heavy current. We check elements, wiring and amp draw so your backup heat is safe, not just working.
Flat-rate, no meter
You approve one price up front. No hourly clock, no surprise add-ons when the job is done.
Honest diagnosis
We test the actual failure and repair what is broken, whether it is a sequencer, an element or a thermostat setting. No scare tactics.
Let's get you comfortable
Call the county line closest to you and we will get a technician headed your way. Office hours: 24/7.