Heat Pumps

Heat pump repair in Tampa Bay

No heat, no cooling, or a unit stuck in defrost? Our stocked trucks fix most Tampa Bay heat pump problems on the first visit.

The short answer

Heat pump repair in Tampa Bay needs a technician who understands how the system works in both modes. FL HVAC Team diagnoses the real failure, whether it is a stuck reversing valve, a bad defrost control, a blown capacitor, a weak compressor or a refrigerant leak, then shows you a flat-rate price before touching a wrench. Most repairs are finished the same day because our vans carry the parts that fail most often on Gulf Coast systems, and we test both the cooling and heating cycles before we leave.

A heat pump works harder than almost any system in the country because it runs nearly year round in our climate. That wear shows up in the parts that make it unique. The reversing valve that switches between heating and cooling can stick, the defrost board that clears winter frost can fail, and salt air near the bays corrodes the outdoor coil and electrical contacts. We trace the symptom back to its cause instead of guessing, so the same problem does not put you back in the heat or the cold next week.

What we handle

Common heat pumps jobs

No heat or no cooling

Failed capacitors, contactors, compressors and low refrigerant are common causes in both modes. We test, confirm and quote the fix.

Reversing valve and mode problems

A unit that blows cold when it should heat, or will not switch modes, usually points to the reversing valve or its control. We diagnose it precisely.

Defrost cycle faults

A heat pump iced over with no clearing cycle points to a bad defrost board, sensor or timer. We find which and correct it.

Noises, leaks and short cycling

Grinding, buzzing, water leaks or a system that rapidly turns on and off point to electrical, drainage or refrigerant issues we can pinpoint on site.

How it works

Our process

Step 01

Call or book

Tell us the symptom and we give you a real arrival window, not a vague all-day wait.

Step 02

Free diagnosis and estimate

The technician tests both modes, shows you the failed part, and gives you a flat-rate repair price at no charge before any work begins.

Step 03

Same-visit fix

You approve the price and we complete most repairs on the spot, then confirm cooling and heating both work before we leave.

Every visit

What’s included

Clear, upfront work with no surprises. Call (813) 603-6398 and we will get started.

  • Full system inspection in both cooling and heating modes
  • Reversing valve and defrost control testing
  • Flat-rate price approved before work starts
  • Common parts stocked on every truck
  • Refrigerant leak checks and electrical testing
  • A cooling and heating check before we go, backed by our workmanship guarantee

Upfront about pricing

What affects the cost

Every job is quoted flat-rate before work starts. Here is what moves the number.

The failed component

A capacitor or defrost sensor is a quick, low-cost fix. A reversing valve, compressor or coil is a larger repair, and we will tell you honestly which one you are facing.

System age

On a heat pump over ten years old we show you repair-versus-replace numbers so you do not pour money into a unit near the end of its life.

Refrigerant type

Older R-22 systems cost more to recharge because the refrigerant is being phased out. We explain your options clearly.

Rated 5.0 from 145 reviews

Tampa Bay homeowners trust us for punctual, flat-rate service. Read what your neighbors say, or add your own.

Read our Google reviews

Good questions

Before you book

My heat pump blows cold air when it should heat. What is wrong?

The most common cause is a stuck reversing valve or a fault in its control, though low refrigerant or a thermostat setting can mimic it. We test the valve and the full heating cycle to find the real cause.

My heat pump is covered in ice. Is that a problem?

A brief frosting that clears on its own is the normal defrost cycle. Ice that never melts points to a failed defrost board, sensor or low charge. Turn the system to fan or off and call us before the ice damages the coil.

How fast can you get here for a heat pump repair?

We keep same-day slots open most days and answer the phone 24/7 for emergencies like no heat on a cold night or no cooling in extreme heat. Call early for the widest choice of windows.

How much does a heat pump repair cost in Tampa?

We provide a free diagnostic and estimate, then a flat-rate repair price you approve before any work begins. No hourly meter and no surprise add-ons.

Should I repair or replace my heat pump?

If your system is under ten years old and the repair is minor, repair almost always wins. For older units facing a major repair like a compressor or reversing valve, we show you the numbers on both so you decide with no pressure.

Why does my heat pump keep running the backup heat strips?

Constant strip heat usually means the compressor or refrigerant side is not carrying the load, often from a leak, a stuck reversing valve or a defrost fault. It drives up your bill, so it is worth diagnosing promptly.

Do you repair heat pumps on weekends?

Yes. We run 24/7, including weekends and holidays, because Tampa weather does not take days off. A real local dispatcher answers, not a call center.

Is my repair under warranty?

Many parts carry a manufacturer warranty, and our workmanship is guaranteed. Bring us the model details and we will check your coverage before quoting.

Why FL HVAC Team

Neighbors who show up

Both-mode expertise

We repair and test the cooling and heating cycles, the reversing valve and the defrost system, not just the part that is easy to reach.

Same-day, most days

Open slots held daily and true 24/7 emergency response so you are never stuck without heat or cooling.

Flat-rate, honest diagnosis

You approve one price up front, and we show you the failed part. No hourly meter, no scare tactics, no upsell.

Let's get you comfortable

Call the county line closest to you and we will get a technician headed your way. Office hours: 24/7.